Cisco Meraki MR36-HW Access Point

Radios

• 2.4 GHz 802.11b/g/n/ax client access radio

Antenna

Internal Antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)

Power

• Power over Ethernet: 37 – 57 V (802.3af compatible) • Alternative: 12 V DC input

Interfaces

• 1x 10/100/1000 BASE-T Ethernet (RJ45) • 1x DC power connector (5.5 mm x 2.5 mm, center positive)

Mounting

• All standard mounting hardware included

PDF CATÁLOGO

Radios	• 2.4 GHz 802.11b/g/n/ax client access radio • 5 GHz 802.11a/n/ac/ax client access radio • 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio • Concurrent operation of all four radios • 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support • Supported frequency bands (country-specific restrictions apply): ◦ 2.412- 2.484 GHz ◦ 5.150- 5.250 GHz (UNII-1) ◦ 5.250- 5.350 GHZ (UNII-2A) ◦ 5.490 – 5.730 GHz (UNII-2C) ◦ 5.735 -5.825 GHz (UNII-3)
Antenna	Internal Antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)
Power	• Power over Ethernet: 37 – 57 V (802.3af compatible) • Alternative: 12 V DC input • Power consumption: 15W max (802.3af). Note: actual power consumption may vary depending on the AP usage. • Power over Ethernet injector and DC adapter sold separately
Interfaces	• 1x 10/100/1000 BASE-T Ethernet (RJ45) • 1x DC power connector (5.5 mm x 2.5 mm, center positive)
Mounting	• All standard mounting hardware included • Desktop, ceiling, and wall mount capable • Ceiling tile rail (9/16, 15/16 or 1 1⁄2” flush or recessed rails), assorted cable junction boxes • Bubble level on mounting cradle for accurate horizontal wall mounting

Radios	• 2.4 GHz 802.11b/g/n/ax client access radio
Antenna	Internal Antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)
Power	• Power over Ethernet: 37 – 57 V (802.3af compatible) • Alternative: 12 V DC input
Interfaces	• 1x 10/100/1000 BASE-T Ethernet (RJ45) • 1x DC power connector (5.5 mm x 2.5 mm, center positive)
Mounting	• All standard mounting hardware included